Stake’s Countenance Evaluation Method on Occupational Health and Safety Implementation in Electronics Engineering Education's Student Industrial Internship

Muhammad Munir, Universitas Negeri Yogyakarta, Indonesia
Mentari Putri Jati, Universitas Negeri Yogyakarta, Indonesia
Bekti Wulandari, Universitas Negeri Yogyakarta, Indonesia
Satriyo Agung Dewanto, Universitas Negeri Yogyakarta, Indonesia

 10.21831/elinvo.v7i1.45541

Abstract


This paper discusses the evaluation of the implementation of Occupational Health and Safety (OHS) in student industrial internships. Due to the possibility of the risk of work accidents on industrial internship students are prone to occur. Currently, there are still few who discuss the evaluation of OHS implementation as the basis for carrying out sustainable action efforts. Based on the evaluation carried out, the OHS Implementation in Electronics Engineering Education's Student Industrial Internship has been feasible and follows applicable laws and regulations. The results of this evaluation can provide ideas for increasing sustainable action efforts regarding OHS in Student Industrial Internships.

Keywords


occupational health and safety; evaluation; stake’s countenance model

Full Text:

PDF

References


J. Presnal, H. Houston, and G. Maberry, “The Electrical Safety Program and The Value in Parterning with Health & Safety Professionals,” 2020, doi: 10.1109/ESW42757.2020.9188320.

F. H. M. K. Issamar and R. L. Roberto, “New and Emerging Occupational Risks (NER) in Industry 4.0: Literature Review,” in IEEE 7th International Engineering, Sciences and Technology Conference, IESTEC 2019, 2019, pp. 394–399, doi: 10.1109/IESTEC46403.2019.00078.

R. Hojo, C. Bordlein, K. Hamajima, S. Umezaki, and S. Shimizu, “For a Quantitative Evaluation of Risk Assessment -Behavior-based Safety,” in IEEE 2nd Global Conference on Life Sciences and Technologies, 2020, pp. 378–380, doi: 10.1109/LifeTech48969.2020.1570619864.

K. M. Ng, N. K. Madzhi, J. Johari, and H. C. M. Haris, “Final Year Students’ Perception on Occupational Safety and Health Training at the Faculty of Electrical Engineering, Universiti Teknologi MARA,” in IEEE 11th International Conference on Engineering Education, ICEED 2019, 2019, pp. 47–52, doi: 10.1109/ICEED47294.2019.8994916.

N. Wisudawati and R. Patradhiani, “Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) dengan Metode Hazard Analysis (Studi Kasus pada Proyek Pembangunan Perumahan),” Integr. J. Ilm. Tek. Ind., vol. 5, no. 1, p. 29, 2020, doi: 10.32502/js.v5i1.2971.

I. P. M. Dewantara, “Stake Evaluation Model (Countenance Model) in Learning Process Bahasa Indonesia At Ganesha University of Educational,” Int. J. Lang. Lit., vol. 1, no. 1, p. 19, 2017, doi: 10.23887/ijll.v1i1.9615.

E. B. Daculan, “Comparative Evaluation of Assessment Activities in An Introductory Occupational Safety and Health Course,” in IEEE Region 10 Annual International Conference, Proceedings/TENCON, 2020, pp. 1323–1327, doi: 10.1109/TENCON50793.2020.9293851.

A. Ranjan, Y. Zhao, H. B. Sahu, and P. Misra, “Opportunities and Challenges in Health Sensing for Extreme Industrial Environment: Perspectives from Underground Mines,” IEEE Access, vol. 7, pp. 139181–139195, 2019, doi: 10.1109/ACCESS.2019.2941436.

M. Nishino, R. Nakajima, A. Takahashi, and A. Sugama, “A Fundamental Study on Easy-to -Understand Work Procedure Manuals for Safety Work in Construction Sites,” in IEEE 8th International Conference on Industrial Engineering and Applications, 2021, pp. 79–83.

R. Jouaret, S. Bendak, and H. Rashid, “Effects of Ambient Temperature on Construction Workers Performance and Safety,” in IEEE 7th International Conference on Frontiers of Industrial Engineering, ICFIE 2020, 2020, pp. 114–118, doi: 10.1109/ICFIE50845.2020.9266745.

K. M. Mehata, S. K. Shankar, N. Karthikeyan, K. Nandhinee, and P. Robin Hedwig, “IoT Based Safety and Health Monitoring for Construction Workers,” in IEEE 1st International Conference on Innovations in Information and Communication Technology, ICIICT 2019, 2019, pp. 1–7, doi: 10.1109/ICIICT1.2019.8741478.

U. Hussain, M. H. Shoukat, and M. S. Haider, “Analysis of Safety Awareness, Accident Prevention and Implementation of Behavior Based Safety Program in Energy Utility,” in 2019 6th International Conference on Frontiers of Industrial Engineering, ICFIE 2019, 2019, pp. 84–88, doi: 10.1109/ICFIE.2019.8907683.

Y. Choi, J. H. Park, and B. Jang, “A Risk Estimation Approach based on Deep Learning in Shipbuilding Industry,” in IEEE 10th International Conference on ICT Convergence: ICT Convergence Leading the Autonomous Future, 2019, pp. 1438–1441, doi: 10.1109/ICTC46691.2019.8939725.

Arminas, P. Haming, N. Inzany, and A. Nurwahidah, “Design of Ergonomic Bipang Molding Tool to Increase Production of Bipang,” in IEEE International Conference on Industrial Engineering and Applications, ICIEA 2019, 2019, pp. 856–860, doi: 10.1109/IEA.2019.8715008.

J. L. S. Abraham and Y. T. Prasetyo, “Macroergonomics-Based Approach in Job Satisfaction of Senior High School Teachers in a School in Mindoro Using Herzberg’s Two-Factor Theory,” in IEEE 8th International Conference on Industrial Engineering and Applications, ICIEA 2021, 2021, pp. 106–109, doi:10.1109/ICIEA52957.2021.9436756




DOI: https://doi.org/10.21831/elinvo.v7i1.45541

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Elinvo (Electronics, Informatics, and Vocational Education)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Our Journal indexed by:

ISSN 2477-2399 (online) || ISSN 2580-6424 (print)

View My Stats

Flag Counter